VoIP GuidesContact us
← Back

Set up a Yealink T5x phone

Register a T53, T54W, T57W and T58W phone to your phone system.

These steps cover the T53, T54W, T57W and T58W. If your phone system supports auto-provisioning, use that instead.

Steps

  1. On the phone, press OK or go to Menu → Status to find the IP address.
  2. Open the IP in a browser and log in (default admin / admin).
  3. Go to Account → Register, turn the line on and enter your SIP username, password and server.
  4. Click Confirm and check the line registers.
  5. Change the admin password, then set the time zone.
More Yealink guides

Register a Yealink phone to a SIP account

Add your provider's SIP details through the phone's web page.

AdminAll models

Factory reset a Yealink phone

Wipe settings when a phone was used on another system or the login is lost.

AdminAll models

Update Yealink firmware

Install a newer firmware version through the web page.

AdminAll models

Set an auto-provisioning URL

Point the phone at your phone system so it sets itself up.

AdminAll models

Set up a BLF (busy lamp) key

Show whether a colleague is on the phone, and call them with one press.

AdminAll models

Change the admin password

Secure the phone's web page.

AdminAll models

See all Yealink guides