VoIP GuidesContact us
← Back

Register a Yealink phone to a SIP account

Add your provider's SIP details through the phone's web page.

Use this when your provider gives you a username, password and server rather than setting the phone up automatically.

Steps

  1. Plug the phone into your network.Press OK on the phone (or go to Menu → Status) to see its IP address.
  2. On a computer on the same network, type that IP into a browser and log in.The default is admin / admin.
    192.168.1.45 Log inUsernameadminPasswordadminLog in
    Illustration. Your screen may look slightly different.
  3. Go to Account → Register and pick Account 1.
  4. Set Line Active to Enabled.Fill in Label and Display Name.
  5. Enter Register Name and User Name (usually both your SIP username or extension), and the Password.
  6. Under SIP Server 1, enter the Server Host and Port (usually 5060).
    192.168.1.45 Account → RegisterLine ActiveEnabledRegister Name201User Name201Password••••••••Server Hostsip.yourprovider.comPort5060Confirm
    Illustration. Your screen may look slightly different.
  7. Click Confirm.Register Status should change to Registered and the line key LED turns green.
Tip: Still showing Register Failed? Check the password first, then see “Phone won't register”.
More Yealink guides

Set up a Yealink T7x or T8x phone

Register a T73, T74, T77, T85, T87 or T88 to your phone system.

AdminT7x series, T8x series

Add a T7x or T8x phone to 3CX

Provision a T73, T74, T77, T85 or T87 automatically from 3CX.

AdminT7x series, T8x series

Update firmware on a T7x or T8x phone

Keep T7 and T8 phones up to date.

AdminT7x series, T8x series

Set up a Yealink T3x phone

Register a T31, T33 and T34 series phone to your phone system.

AdminT3x series

Set up a Yealink T4x phone

Register a T42U, T43U, T44U, T46U and T48U phone to your phone system.

AdminT4x series

Set up a Yealink T5x phone

Register a T53, T54W, T57W and T58W phone to your phone system.

AdminT5x series

See all Yealink guides