VoIP GuidesContact us
← Back

Put a Grandstream phone on a voice VLAN

Separate phone traffic from computer traffic.

Your network administrator gives you the VLAN ID.

Steps

  1. Log in to the phone's web page.
  2. Go to Network → Advanced Settings.
  3. Under Layer 2 QoS, enter the 802.1Q/VLAN Tag.
  4. Click Save and Apply.The phone restarts.
More Grandstream guides

Find a Grandstream ATA's IP address

Use the voice menu to hear the address.

AdminHT80x ATA series, HT81x ATA series

Set up a Grandstream HT801 or HT802

Register an analogue phone line to your provider.

AdminHT80x ATA series

Set up a Grandstream HT812 or HT814

Register analogue phones on the two- or four-port models.

AdminHT81x ATA series

Factory reset a Grandstream ATA

Wipe an HT series ATA back to defaults.

AdminHT80x ATA series, HT81x ATA series

Update Grandstream ATA firmware

Install the latest firmware on an HT series ATA.

AdminHT80x ATA series, HT81x ATA series

Set up a fax machine on a Grandstream ATA

Send and receive faxes over VoIP.

AdminHT80x ATA series, HT81x ATA series

See all Grandstream guides