VoIP GuidesContact us
← Back

Set a static IP address on a Yealink phone

Give the phone a fixed address on your network.

Most networks use DHCP, so only do this if you need to.

Steps

  1. In the phone's web page, go to Network → Basic.
  2. Under IPv4, choose Static IP Address.
  3. Enter the IP address, subnet mask, gateway and DNS servers.
  4. Click Confirm.The phone restarts with the new address.
Tip: Write down the new address first, or you may not be able to find the phone again.
More Yealink guides

Register a handset to a Yealink DECT base

Pair a new or reset handset with the W70B.

AdminDECT series

Assign lines to Yealink DECT handsets

Choose which account each handset uses.

AdminDECT series

Update Yealink DECT firmware

Update the W70B base and handsets.

AdminDECT series

Factory reset a Yealink DECT base

Wipe the W70B back to defaults.

AdminDECT series

Register a Yealink phone to a SIP account

Add your provider's SIP details through the phone's web page.

AdminAll models

Factory reset a Yealink phone

Wipe settings when a phone was used on another system or the login is lost.

AdminAll models

See all Yealink guides