VoIP GuidesContact us
← Back

DECT handset won't register

Fix registration failures.

Registration needs the base in registration mode at the same time.

Steps

  1. Hold the base button until the registration light flashes, then register within a minute or two.
  2. Check you're entering the right base PIN (default 0000).
  3. De-register the handset from its old base first if it was used elsewhere.
  4. Check the base hasn't reached its handset limit.
More Yealink guides

DECT handset says Searching

Fix a handset that has lost the base.

TroubleshootingDECT series

Yealink shows Register Failed

Fix a line that won't register.

TroubleshootingAll models

Yealink stuck on Initializing

Fix a phone that won't finish starting.

TroubleshootingAll models

Can't open the Yealink web page

Get into the phone's settings from a browser.

TroubleshootingAll models

Yealink screen is blank

Get the phone powered on.

TroubleshootingAll models

Set up a Yealink W70B DECT base

Connect the base and register it to your phone system.

AdminDECT series

See all Yealink guides